Coal liquefaction using a hydrogenated creosote oil solvent: H-atom transfer from hydrogen donor components in the solvent

The presence of hydroaromatic, hydrogen donor components in a coal-derived solvent is one of the more important factors in the successful operation of a non-catalytic coal liquefaction process. Various hydrogen donor species present in a hydrogenated creosote oil have been identified. Their rate of disappearance under conditions that are consistent with a short residence time coal liquefaction process has been used to rank the reactivities of the various hydrogen donors. 1,2,3,10b-Tetrahydrofluoranthene was found to be an exceptional donor while 4,5-dihydropyrene, the hexahydropyrenes and 9,10-dihydrophenanthrene were found to be quite active. Sym.-octahydrophenanthrene and 2a,3,4,5-tetrahydroacenaphthene exhibited moderate activity. Tetralin and the four methyltetralin isomers were found to be unreactive under the coal liquefaction conditions employed.     

Analysis of polar compound classes in SRC-II liquids: Comparison of non-aqueous titrametric,i.r. spectrometric and h.p.l.c. methods

Results for various types of polar compounds in SRC-11 coal-derived liquids and other fuels were obtained by one or more of the three analytical methods: non-aqueous titration, i.r. spectroscopy and h.p.l.c. Practical aspects as well as precision, accuracy and assumptions necessary for effective application of each of the methods are discussed. H.p.l.c. is applicable to the widest variety of compound types, is the most rapid, most sensitive and shows the best promise for increased development and improvement. Application and development of these techniques is a logical step toward improving process monitoring, catalyst development, toxicological screening and general fuel analysis.     

The new structure of fibre glass reinforced plastics bolt

The develop actuality and direction of FRP (fibre glass reinforced plastics) bolt in the world are analyzed. The new type structure of FRP bolt was designed. Trial data indicate that, all kinds of capability target of this FRP bolt all achieve and exceed the country stand-ard, substitute present metal bolt, wood bolt and bamboo bolt and other side bolt, it can gain magnitude technology and economy benefit. FRP bolt mechanization product line produce ef-ficiency is high, its throughput a day are 750 base, this can meet demand of hit-small mining company.     

我国煤炭资源产业循环经济发展策略研究

在系统分析的基础上提出煤炭资源产业循环经济发展策略:研发、推广环境友好技术和先进技术包括清洁开采技术、推广和利用水煤浆、先进火力发电技术等进行生产;改变狭义的资源观,用好“废物”资源,如矿井水、煤层气、粉煤灰等;发展煤炭资源深加工,提高产品附加值;行业耦合发展,如煤电联营,提高资源利用效率;大力发展节能技术,减少煤炭资源消耗。并为我国煤炭资源产业发展循环经济的产业政策提出了几点建议。     

新型煤填充高分子复合材料的研制与应用

根据煤的结构特点,对煤进行闭环的超细粉碎,脱除部分挥发分,表面傅-克烷基化化学改性,与塑料经强制排气式共混,研制了一种新型的煤填充高分子复合塑料母料.将该母料用于聚丙烯,可制得具有较好强度、韧性和优良电绝缘性能的复合材料,在煤含量为20%(质量分数)时,复合材料的拉伸屈服强度大于24.0MPa,缺口冲击强度不小于8.0 kJ/m2;同时,煤/聚丙烯复合材料在较大的煤含量范围内(0%～50%,质量分数),直流绝缘电阻率保持在1014 Ω·cm以上.新型煤填充高分子复合材料在电线电缆中的应用表明,加工性能良好,成品绝缘层力学性能满足标准要求,绝缘性能优良,并可有效降低材料的成本.     

煤巷锚杆支护技术的探讨

从巷道围岩强度,原岩自重应力,地质构适应力,煤柱留设宽度和巷道断面形状等方面对影响煤巷稳定性的因素进行了分析,提出了煤巷锚杆支护注意的6个问题。     

济钢高炉喷煤数学模型的研究与应用

基于湍流两相流理论建立了高炉喷煤两相流动及传质三维数学模型。采用该模型指导高炉生产 ,高炉利用系数由2 .7t/(m3.d)提高到 3 .0 t/(m3.d)以上 ,焦比由 460 kg/t降到 40 0 kg/t,煤比达到 10 0 kg/t,提高了高炉的各项经济技术指标。     

Preparation of clean coal by flotation following ultra fine liberation

This paper reports the results of current fundamental research at the Department of Process Engineering, University of Miskolc on the processing of clean coal from Mecsek bituminous coal, Southern Hungary. The theoretical possibility of the separation of different petrographic components was proven experimentally and their liberation degree was determined based on the petrographic composition, flotation kinetic study of isolated components (groups of components), scanning electron microscopy and microprobe analyses. The mill with stirred ball media was chosen for the ultra-fine liberation of the coal components. It was revealed that along with the liberation of coal components, their surface oxidation and spontaneous agglomeration, entrapping the mineral impurities take place in ultra-fine grinding. This paper discusses the interfacial phenomena occurring in the ultra-fine grinding process and their influence on the flotation. The concept for the advanced preparation of clean coal was developed, tested and proved. The main steps of this concept are the ultra-fine liberation in the stirred-media mill, the de-agglomeration of flocs spontaneously formed during the ultra-fine grinding and the induced (hydrophobic) flocculation with the following two-step flotation in a flotation column.     

Response of inertinites from some Australian coals to non-catalytic hydrogenation in tetralin

Inertinite concentrates from three Australian bituminous coals were hydrogenated at various temperatures ranging from 350 to 475 °C in the presence of tetralin without any added catalyst. Both conversion yields and microscopic observations of the benzene-extracted hydrogenation residues have revealed that the hydrogenation of the inertinite macerals becomes significant only > 400 °C, whereas the dissolution-hydrogenation of the accompanying vitrinite macerals occurs mainly between 350 and 400 °C. The major reaction pathway for the inertinite particles in the hydrogenation process appears to be one of initial mild carbonization followed by hydrogenation. A simplified reaction scheme is proposed which describes the reaction pathway involved in the hydrogenation of inertinite.     

Influence of the oxygen content of low-rank coals on the development of porosity during carbonization

The development of porosity in the course of carbonization of a flame coal, original and pre-oxidized, was studied by means of the adsorption of benzene and carbon dioxide. The results were compared with corresponding data for cokes from a xylitic brown coal. The influence of coal oxygen content on the formation of coke porosity and its thermal dependence is discussed.